customized lanyard - LRP024 lanyards can custom screen printed a restaurant logo on the custom neck lanyard strap

LRP024 customized lanyard Features

Lanyard Length	41-43cm (16-17inch) long without fastener length
Lanyard Strap	width 1/2 inch (12mm) of lanyard strap
Lanyard Attachment	A metal key ring at Bottom of customized lanyard
Imprinting Method	Repeat screen printing a single color artwork logo or text on front side.
Standard Imprinting Area	Width 7mm ( Design's height 7mm ) on single side of lanyard strap.

    The customized lanyard can custom screen printed a restaurant logo on the custom neck lanyard strap. LRP024 badges lanyards are custom lanyards and badge holders.The badge holders with width 1/2 inch (12mm) single color of woven lanyard strap and metal key ring that are choicest identification holders to keep photo ID card or cell phone in restaurant.
    LRP024 custom lanyards are custom neck lanyard strap with a metal key ring which uses screen printing for its one sided repeated single color artwork logo or text.
    LRP024 1/2 inch customized lanyard had been utilitarian collection for land photo ID card, pass cards, as good as alternative tiny equipment in restaurant. The lanyard is far more than just a simple device that you wear around your neck to hold cell phone or to carry your photo ID card. With a quick attachment change, your lanyard can be used in hundreds of different ways.

Standard of LRP024 customized lanyard

A custom neck lanyard strap with a metal key ring which uses screen printing for its one sided repeated single color artwork logo or text.

Material of LRP024 customized lanyard

width 1/2 inch (12mm) single color of woven lanyard strap and metal key ring.

Dimension of LRP024 customized lanyard

41-43cm (16-17inch) long without fastener length.

Dimension of LRP024 customized lanyard

width 1/2 inch (12mm) of woven lanyard strap.

Standard Strap Color of LRP024 customized lanyard

There are 22 color of custom neck lanyard straps for you to choose. But it may apply an extra fee when you choose a special custom neck lanyard strap color.

Customized Material Color Service for LRP024 customized lanyard

Customized material color service is available with each order that is over 1000 pieces and there's an extra charge for this service. Please contact us if you have the needs.

Standard Attachment of LRP024 customized lanyard

A metal key ring at bottom of customized lanyard.

Main Fastener of LRP024 customized lanyard

The main fastener of lanyard locate at bottom of badge holders. You may change the main fastener of badge holders to any of these 17 for your need. You will only be charged with the price differences. If the main fastener of lanyard that you need is not in these 17 standard custom neck lanyard fasteners, we are willing to seek the fastener for your need. Please contact us for your special main fastener of lanyard.

Additional Attachments of LRP024 customized lanyard

There are 2 of additional attachment(s) for you to add on your customized lanyard, simply by adding on.
But the extra fee will automatically add on in your order when you plus additional attachment with your customized lanyard. If these additional attachments that you need is not in the 2 additional attachment of lanyard, we are willing to seek the attachment for your need. Please contact us for your special additional attachments.

Standard Imprinting Method of LRP024 customized lanyard

Repeat screen printing a single color artwork logo or text on front side.

Standard Imprinting Area of LRP024 customized lanyard

Width 7mm ( Design's height 7mm ) on single side of custom neck lanyard strap.

Standard Maximum Size of Imprinting Molding for LRP024 customized lanyard

Height 7mm X Length 450mm.. The customized custom neck lanyard strap is repeated screen printed from end to end. There's a maximum imprinting size for the text or logo design, printing under the maximum size is available. Your imprinting size does affect the ratio of the text or logo design.

Standard Maximum Imprinting Colors for LRP024 customized lanyard

Printing multiple colors is available, maximum 6 colors on each side. However, not every text or logo design can have multiple colors imprinting. Please contact us if there's any need.

Second Side Imprinting Service for LRP024 customized lanyard

Second side imprint is available the condition is same as the standard product imprint service. There's an extra imprinting fee and extra molding setup fee for second side printing.

Different artwork for Second Side Imprint on LRP024 customized lanyard

Printing multiple colors of text or logo design on second side either same or different with the first side of strap is available. There's an extra imprinting charge fee for choosing different text or logo design on the second side of the strap.

Standard Imprinting Colors for LRP024 customized lanyard

We provide 27 colors for regular imprinting color choose and totally imprinting color with a maximum 6 colors limit on each side. It will be charge a extra fee $0.10/each side/each custom neck lanyard when your imprint color to be a metallic color or a special color.
We provide most PMS colors with your each order that is over 500 pieces, but imprint fee and setup fee will be extra charged when you ask PMS Color Match Service printing. We also provide special color imprint, imprint fee and setup fee will also be extra charged. Not every special color can be imprint, please contact us if there's any need.

Standard Molding Fee of LRP024 customized lanyard

The standard screen printing molding fee is 40 for the standard product of LRP024 customized lanyard.

Additional Imprinting Fee of LRP024 customized lanyard

   When you add to print color on custom neck lanyard strap, there is 2 extra fee may apply
     A. Extra screen printing color fee : $0.10/each side/each custom neck lanyard.
     B. Extra screen printing molding fee : $40/each color/each artwork.

Pre-production Proof service of LRP024 customized lanyard

Requesting a customized lanyard production proof adds a cost of $150. However, we do require a certain quantity of your order. When you require an actual production sample of your order, we do provide Production Proof service. There will be an extra charge for the production sample you request that is not within the standard product ( A custom neck lanyard strap with a metal key ring which uses screen printing for its one sided repeated single color artwork logo or text. ).

Mix Product Color Service for LRP024 customized lanyard

Requesting for mixing different color with LRP024 customized lanyard for each order you have made is available, imprinting the product with same logo design and color. The minimum order is 1000 pieces and the minimum order for each color need to be over 200 pieces, There will be an extra charge $0.05/each custom neck lanyard for the "Mix Product Color Service", Please contact us if you need this mix product color service.

Standard Production Time frame for LRP024 customized lanyard

With the product, quantity, choosing different fasteners, or requesting other services does affect the production time. The standard production time is approximately 14 business days after the order and artwork has been approved with the quantity under 5000 pieces. Extra working days will be needed with the product that's not within the standard product or a large quantity of order.

RUSH Service for LRP024 customized lanyard

When you need the rush service with your order, it adds on a cost which is listed on the selection of "Production Time". With the product, quantity, choosing different fasteners, or requesting other services does affect the production time.
The RUSH production time for is approximately 5-6 business days after the order and artwork has been approved. Extra working days will be needed with the product that's not within the standard product or a large quantity of order.