custom id neck strap - LTPR25 lanyard can custom screen printed a school logo on the multifunction lanyard strap

LTPR25 custom id neck strap Features

Lanyard Length	41-43cm (16-17inch) long without the fastener length
Lanyard Strap	Width 5/8 inch (15mm) of lanyard strap
Lanyard Attachment	A plastic release function seat with a swivel key ring at Bottom of custom id neck strap
Imprinting Method	Repeat screen printing a single color artwork logo or text on front side.
Standard Imprinting Area	Width 9mm ( Design's height 9mm ) on single side of lanyard strap.

    The custom id neck strap can custom screen printed a school logo on the multifunction lanyard strap. LTPR25 neck lanyard is Super universal lanyard and rush order custom lanyard.The rush order custom lanyard with Width 5/8 inch (15mm) single color of woven lanyard strap and plastic swivel key ring that is useful id badge holder to keep student ID card or dorm pass in National education fair.
    LTPR25 Super universal lanyard is multifunction lanyard strap with a plastic swivel key ring which uses screen printing for its one sided repeated single color artwork logo or text.
    LTPR25 rush order screen printing custom lanyard had been utilitarian collection for land student ID card, pass cards, as good as alternative tiny equipment in National education fair. The id neck strap is far more than just a simple device that you wear around your neck to hold dorm pass or to carry your student ID card. With a quick attachment change, your lanyard can be used in hundreds of different ways.

Standard of LTPR25 custom id neck strap

A multifunction lanyard strap with a plastic swivel key ring which uses screen printing for its one sided repeated single color artwork logo or text.

Material of LTPR25 custom id neck strap

Width 5/8 inch (15mm) single color of woven lanyard strap and plastic swivel key ring.

Dimension of LTPR25 custom id neck strap

41-43cm (16-17inch) long without the fastener length.

Dimension of LTPR25 custom id neck strap

Width 5/8 inch (15mm) of lanyard strap.

Standard Strap Color of LTPR25 custom id neck strap

There are 22 color of multifunction lanyard straps for you to choose. But it may apply an extra fee when you choose a special multifunction lanyard strap color.

Customized Material Color Service for LTPR25 custom id neck strap

Customized material color service is available with each order that is over 1000 pieces and there's an extra charge for this service. Please contact us if you have the needs.

Standard Attachment of LTPR25 custom id neck strap

A plastic release function seat with a swivel key ring at bottom of custom id neck strap.

Main Fastener of LTPR25 custom id neck strap

The main fastener of id neck strap locate at bottom of rush order custom lanyard. You may change the main fastener of rush order custom lanyard to any of these 14 for your need. You will only be charged with the price differences. If the main fastener of id neck strap that you need is not in these 14 standard multifunction lanyard fasteners, we are willing to seek the fastener for your need. Please contact us for your special main fastener of id neck strap.

Additional Attachments of LTPR25 custom id neck strap

There are 2 of additional attachment(s) for you to add on your custom id neck strap, simply by adding on.
But the extra fee will automatically add on in your order when you plus additional attachment with your custom id neck strap. If these additional attachments that you need is not in the 2 additional attachment of id neck strap, we are willing to seek the attachment for your need. Please contact us for your special additional attachments.

Standard Imprinting Method of LTPR25 custom id neck strap

Repeat screen printing a single color artwork logo or text on front side.

Standard Imprinting Area of LTPR25 custom id neck strap

Width 9mm ( Design's height 9mm ) on single side of multifunction lanyard strap.

Standard Maximum Size of Imprinting Molding for LTPR25 custom id neck strap

Height 12mm X Length 450mm.. The custom multifunction lanyard strap is repeated screen printed from end to end. There's a maximum imprinting size for the text or logo design, printing under the maximum size is available. Your imprinting size does affect the ratio of the text or logo design.

Standard Maximum Imprinting Colors for LTPR25 custom id neck strap

Printing multiple colors is available, maximum 6 colors on each side. However, not every text or logo design can have multiple colors imprinting. Please contact us if there's any need.

Second Side Imprinting Service for LTPR25 custom id neck strap

Second side imprint is available the condition is same as the standard product imprint service. There's an extra imprinting fee and extra molding setup fee for second side printing.

Different artwork for Second Side Imprint on LTPR25 custom id neck strap

Printing multiple colors of text or logo design on second side either same or different with the first side of strap is available. There's an extra imprinting charge fee for choosing different text or logo design on the second side of the strap.

Standard Imprinting Colors for LTPR25 custom id neck strap

We provide 27 colors for regular imprinting color choose and totally imprinting color with a maximum 6 colors limit on each side. It will be charge a extra fee $0.10/each side/each multifunction lanyard when your imprint color to be a metallic color or a special color.
We provide most PMS colors with your each order that is over 500 pieces, but imprint fee and setup fee will be extra charged when you ask PMS Color Match Service printing. We also provide special color imprint, imprint fee and setup fee will also be extra charged. Not every special color can be imprint, please contact us if there's any need.

Standard Molding Fee of LTPR25 custom id neck strap

The standard screen printing molding fee is 50 for the standard product of LTPR25 custom id neck strap.

Additional Imprinting Fee of LTPR25 custom id neck strap

   When you add to print color on multifunction lanyard strap, there is 2 extra fee may apply
     A. Extra screen printing color fee : $0.10/each side/each multifunction lanyard.
     B. Extra screen printing molding fee : $40/each color/each artwork.

Pre-production Proof service of LTPR25 custom id neck strap

Requesting a custom id neck strap production proof adds a cost of $150. However, we do require a certain quantity of your order. When you require an actual production sample of your order, we do provide Production Proof service. There will be an extra charge for the production sample you request that is not within the standard product ( A multifunction lanyard strap with a plastic swivel key ring which uses screen printing for its one sided repeated single color artwork logo or text. ).

Mix Product Color Service for LTPR25 custom id neck strap

Requesting for mixing different color with LTPR25 custom id neck strap for each order you have made is available, imprinting the product with same logo design and color. The minimum order is 1000 pieces and the minimum order for each color need to be over 500 pieces, There will be an extra charge $0.10/each multifunction lanyard for the "Mix Product Color Service", Please contact us if you need this mix product color service.